The LoRa low-power sensor terminal adopts a high-performance industrial-grade LoRa solution, has a rich interface, supports lithium battery power supply, solar power supply, DC power supply and other power supply methods, and has been widely used in the M2M industry in the Internet of Things industry chain , Such as smart buildings, smart cities, smart fire protection, smart power, smart agricultu···

LoRaWAN gateway is a gateway based on the low-power wide area network LoRaWAN protocol, which can realize multi-frequency and multi-channel concurrent reception. The super radio frequency processing performance enables the system to have a larger system capacity and a more stable network topology. It is the core equipment of LPWAN. The gateway uses an easy-to-understand WEB configuration interface···

4G DTU data transmission terminal converts serial data and IP data to each other and transmits them through a wireless communication network. It has the advantages of rapid networking, flexible expansion, short construction period, and low cost. It is based on 4G/3G/2.5G/NB- The IoT/Cat1 network is a bearer network, providing industrial users with wireless data transmission channels over TCP/IP, r···

Industrial 5G CPE is a high-performance terminal device based on the 5G network. It uses domestic chips and uses industry-leading 5G technology to convert 5G signals into WLAN signals and network cable access to provide industrial users with wireless broadband access services. The 5G module supports 5G independent networking (SA) and non-independent networking (NSA) two network architectures, with···

4G DTU data transmission terminal uses 4G network for transparent data transmission. The device is called 4G network wireless data two-way transparent transmission terminal. The process of converting serial data into IP data or converting IP data into serial data and transmitting is called Transparent data transmission, let's take a look at the functions and characteristics of the 4G DTU data tran···

After the assembly is completed, when using the product, the 4G DTU needs to be installed on the guide rail in the protective box, and the antenna should be led out to the box and fixed to an appropriate position.

With the rapid development of the Internet of Things, 4G DTU is also widely used in PLC wireless communication; automatic control of data acquisition equipment, monitoring equipment, medical equipment and electronic instruments; automatic meter reading and charging systems for water, electricity, gas, and heating; LED screen wireless Transmission of text, pictures and wireless control; alarm monit···

Typical 5G CPE Application Scenarios,5G CPE is a type of 5G terminal equipment. It receives the 5G signal sent by the operator's base station, and then converts it into a Wi-Fi signal or a wired signal, allowing more local devices (mobile phones, tablets, computers) to access the Internet.

5G CPE is a type of 5G terminal equipment. It receives the 5G signal sent by the operator's base station, and then converts it into a Wi-Fi signal or a wired signal, allowing more local devices (mobile phones, tablets, computers) to access the Internet. The full name of CPE is Customer Premise Equipment, and the industry likes to call it "Customer Terminal Equipment". In fact, Premise means "premi···

The ten smart manufacturing technologies are closely related, and manufacturing companies should gradually and rationally promote the application of these ten smart technologies.