— Blogs —
—Products—
Consumer hotline +8618073152920 WhatsApp:+8615367865107
Address:Room 102, District D, Houhu Industrial Park, Yuelu District, Changsha City, Hunan Province, China
Product knowledge
Time:2025-11-06 15:55:27 Popularity:1059
A weather station tender specification should state what each required measurement must provide and how the proposed equipment will be assessed. Separate mandatory requirements from preferences, and compare identified configurations rather than brand-wide claims. NiuBoL proposals should name the selected instruments, interfaces and services so any exception can be resolved before an order.

Terms such as professional, industrial or research-grade do not define an error limit, measurement interval or exposure. A research project may need a specific uncertainty and record method; an agricultural project may place more weight on representative field measurements and service access. Neither requirement is established by a general product label.
State the quantity, unit, useful operating range and acceptance conditions. Separate accuracy from resolution. A rain gauge's 0.2 mm increment and a temperature display's decimal place describe output steps; they are not interchangeable with measurement error. If a required standard or classification applies, identify the relevant evidence for the proposed model.

| Tender item | Required entry in a proposal | Review action |
|---|---|---|
| Measurement | Model, range, accuracy and relevant conditions | Compare against the required observation, not another model's data |
| Acquisition | Output version and receiving input or register arrangement | Check that the listed connection is usable |
| Record | Units, interval and required statistic or total | Resolve ambiguity before evaluating completeness |
| Remote access | Communication device, destination and service scope | Distinguish network transport from application integration |
| Power and mounting | Selected equipment and site assumptions | Check the complete assembly rather than one component rating |
| Exceptions | Explicit difference and proposed alternative | Obtain a project decision instead of silently accepting a substitution |
A compliance table is useful only when it identifies the equipment actually quoted. A statement that a supplier can provide a higher-accuracy instrument is not compliance if that instrument is not included. Likewise, a sensor-only price should not be compared with a complete station price as though both cover the same work.

The NBL-W-LBTH illustrates why family-level precision claims are unsuitable for tender review. Its temperature and humidity specifications should be assessed as stated, not replaced by a generic +/-0.2 C and +/-2% RH target. A different tender requirement needs an identified compliant alternative or an explicit exception.
| NBL-W-LBTH channel | Measurement range | Accuracy |
|---|---|---|
| Air temperature | -40 to 80 C | +/-0.5 C |
| Relative humidity | 0-100% RH | +/-5% RH |
| Atmospheric pressure | 10-1200 hPa | +/-1.5 hPa |
This model uses DC 12-24 V and offers RS485 Modbus RTU or selected 4-20 mA output. The digital version's default baud rate is 9600 bps. Those details help interface review, but do not establish compatibility with every PLC, RTU or data logger without the corresponding input and configuration checks.

A PV tender may require a radiation instrument with an identified measurement plane and classification. A weather head that supplies air observations does not automatically satisfy that radiation clause. The existing Mauritius PV case shows an arrangement with separate radiation equipment; it is not a certificate for all station configurations.
For agriculture, decide whether broadband irradiance, illuminance or a dedicated PAR measurement is required. For environmental monitoring, specify any pollutant instrument separately. Adding a channel name to a display does not establish the physical measurement, its method or its uncertainty.
Require the proposal to distinguish included functions, selectable options and customer-provided equipment. Local storage, an internet connection, a hosted dashboard and a third-party interface are separate deliverables even when some share a device.
Ask for a representative data exchange where integration is mandatory. A transport protocol name alone does not specify field names, authentication or the receiving application's interpretation. Treat a function requiring later development as separate work with an agreed test, not an already supplied capability.

An air sensor, battery, modem and display can have different operating limits. Do not copy the widest temperature range into a whole-station compliance statement. Identify the limiting component under the actual operating conditions, including any heating or enclosure treatment proposed.
Use IP65 for separate NBL-W-SS and NBL-W-DS wind sensors. Do not interpret that as a corrosion qualification or the protection rating of every cable joint and cabinet. When lightning or hazardous-area requirements apply, request the relevant engineered scope and evidence rather than infer protection from ordinary outdoor construction.

Compare sensors, acquisition, communication, power, supports and services in separate lines. Include calibration requirements, installation responsibility, access to records and any recurring charges that matter to the project. Obtain actual commercial terms instead of treating a general online price range as a project quotation.
Resolve deviations in writing before approval. If an alternative changes the measurement method, placement or maintenance requirement, review those consequences as well as the purchase amount. A lower total is not comparable when a mandatory observation or integration task has been omitted.
No. Set the requirement from the intended measurement and decision. An unnecessarily restrictive figure can exclude usable equipment, while an undefined claim makes proposals difficult to compare.
No. Resolution defines an output step. Accuracy describes an error specification under stated conditions. Require both where relevant and evaluate them separately.
No. Verify the protocol, serial settings, addresses, register map, units and supported receiver functions. For an analog version, verify the signal circuit and receiving input instead.
A case can illustrate an equipment arrangement. Compliance with the new tender still needs the proposed model, configuration and applicable evidence. A photograph does not replace a technical submittal.
Identify whether it is included, optional or customer-provided, with its service period and required integration test. Do not mark the entire clause compliant if essential work remains outside the quoted scope.

A clear weather station tender specification makes differences visible before procurement. Review named models, actual outputs and included services against measurable requirements. Send NiuBoL the specification and the intended receiving system so the proposal can identify a matching configuration and any remaining exceptions.
Prev:How to Buy a Reliable Weather Station: Key Features and Price Comparison
Next:Agricultural Weather Station Trial: Validate a Block Before Rollout
Related recommendations
Sensors & Weather Stations Catalog
Agriculture Sensors and Weather Stations Catalog-NiuBoL.pdf
Weather Stations Catalog-NiuBoL.pdf
Agriculture Sensors Catalog-NiuBoL.pdf
Water Quality Sensor Catalog-NiuBoL.pdf
Related products
Combined air temperature and relative humidity sensor
TDR Soil Moisture & Temperature Sensor for irrigation| RS485 |4-20mA| NBL-S-THR
Soil pH sensor RS485 soil Testing instrument soil ph meter for agriculture |NBL-S-PH
Wind Speed sensor Output Modbus/RS485/Analog/0-5V/4-20mA
Tipping bucket rain gauge for weather monitoring auto rainfall sensor RS485/Outdoor/stainless steel
Pyranometer Solar Radiation Sensor 4-20mA/RS485
Screenshot, WhatsApp to identify the QR code
WhatsApp number:+8615367865107
(Click on WhatsApp to copy and add friends)