— Blogs —
—Products—
Consumer hotline +8618073152920 WhatsApp:+8615367865107
Address:Room 102, District D, Houhu Industrial Park, Yuelu District, Changsha City, Hunan Province, China
Product knowledge
Time:2026-08-23 09:07:00 Popularity:275
A pH conductivity TDS meter price is comparable only when the quotations contain the same measurement hardware and integration scope. Three displayed parameters do not necessarily require three probes: conductivity and calculated TDS can come from one compatible EC sensor, while pH requires its own measurement channel. Ask for an itemized configuration before comparing totals.

For a fixed online point, the basic arrangement may be a digital pH probe plus a conductivity probe that also supplies supported TDS data. The receiver then reads pH, EC, temperature and the available calculated value. This differs from a handheld tester, a bare electrode and a complete station with display, communications and field power.
The NBL-WQ-EC includes a configurable TDS coefficient, with a stated default of 0.64. Confirm the selected range supports the required TDS output. A supplier should identify whether TDS is calculated in the probe or elsewhere, so the quotation does not charge for an unnecessary extra sensing channel.
The pH side is independent. A NBL-WQ-PH digital probe includes a different sensing element, calibration procedure and maintenance requirement. Sharing an RS485 bus does not combine the two probes into one replaceable consumable.

| Quote item | Specify before comparison | Question for the offer |
|---|---|---|
| pH and EC probes | Exact models, ranges, wetted materials and quantities | Are complete digital probes included, or only electrodes requiring transmitters? |
| Receiver | Existing PLC/RTU input or new local display/data logger | Are configuration, storage and required output functions included? |
| Installation | Immersion bracket, threaded connection or engineered sampling arrangement | Who supplies fittings, isolation and retrieval hardware? |
| Cable and panel | Lengths, terminations, enclosure and available power | Are cable extensions, waterproof joints and field protection priced? |
| Remote access | Required gateway, network and data destination | Are equipment, configuration and any recurring charges distinguished? |
| Service | Reference checks, spare components and commissioning duties | Which services and consumables are included, optional or excluded? |
For an actual price, request a current NiuBoL quotation against the selected configuration, quantity and destination. Do not use a generic online tester price as the budget for a permanently installed monitoring point. Likewise, a sensor-only offer should not be compared directly with a complete station and treated as an equivalent lower price.
Keep optional parameters outside the base comparison. A turbidity probe, for example, is a separate optical instrument. If one offer includes it and another does not, show the difference explicitly rather than comparing the headline totals.

| Item | NBL-WQ-PH | NBL-WQ-EC |
|---|---|---|
| Measurement | pH, 0-14 | Conductivity; temperature and TDS where supported |
| Range and accuracy | +/-0.1 pH; 0.01 pH resolution | Four EC options: 0-20.00 uS/cm to 0-200.0 mS/cm; +/-1% FS |
| Temperature and pressure | 0-65 C; below 0.2 MPa | 0-50 C; below 0.6 MPa |
| Supply and consumption | 12-24 V DC; 0.2 W at 12 V | 12-24 V DC +/-10%; 0.2 W at 12 V |
| Connection | RS485 Modbus RTU; 3/4 NPT | RS485 Modbus RTU; 3/4 NPT |
| Body and cable | POM; IP68; 5 m standard cable | ABS, SUS316L or PVC by configuration; IP68; 5 m standard cable |
Specify the actual EC span, not merely the widest available range. As an illustration of the full-scale accuracy term, 1% of a 5000 uS/cm span is 50 uS/cm. That calculation alone does not establish suitability at a low operating value. Compare the required decision limit with the selected range's complete performance before accepting an apparently inexpensive configuration.
The shared nominal supply does not eliminate power design. Two probe loads, the receiver, communications and any sample pump must all be included. IP68 applies to these probe bodies; it does not make an indoor data logger or an exposed junction suitable for outdoor installation.
Request the replaceable items, current unit prices and model-specific service requirements. Do not budget every probe as though it has the same replacement interval. Water chemistry, fouling, access and operating practice can change the service burden substantially.
For pH, check whether the offer is for the base digital probe or another model such as PH-4S. Obtain the correct spare and procedure for that model; a common parameter name does not establish interchangeability.
For repeat orders, retain the accepted range, material, cable and interface details with the model code. If a later quotation changes a component, review its compatibility rather than assuming that a matching price or product name guarantees the same installation.

A probe pair, a pair with a local receiver and a remote station contain different equipment and work. A usable price must identify which arrangement is being supplied and the installation conditions it is expected to meet.
No. A supported conductivity probe can calculate TDS from EC, while pH remains a separate measurement. Confirm the actual channel architecture and conversion setting before approving quantities.
Possibly, if it can power or interface with the probes as designed, read the actual Modbus registers and provide the required local operation and records. A spare serial port alone does not demonstrate those functions.
Provide water composition, pH and EC ranges, temperature, pressure, installation drawing, cable distances and the receiving equipment. Add quantities, destination, required services and schedule so the commercial offer addresses the real scope.
First define the salinity requirement, range and method. Determine whether the proposed measurement arrangement meets it or a dedicated salinity instrument is needed. Do not assume that a calculated TDS channel already satisfies every salinity duty.
Demonstrate correct measurements and units at the intended receiver, service access and an appropriate reference check for each probe. Record the tested configuration so the volume order can reproduce it rather than repeating an unspecified demonstration.
A dedicated salinity sensor is a separately specified option. Include it only where its measurement duty is required, and keep its cost visible outside a basic pH/EC/TDS comparison.

Compare a pH conductivity TDS meter price against an itemized, technically suitable configuration. Confirm the two independent measurement duties, the TDS calculation, receiver compatibility and installation scope, then request current equipment and service prices. NiuBoL can prepare a configuration-specific offer from the actual water conditions and system requirements.
Prev:Benchtop TDS Meter: Make Online Comparisons Repeatable
Next:Optical Dissolved Oxygen Sensor Price: Aeration Retrofit Costs
Related recommendations
Sensors & Weather Stations Catalog
Agriculture Sensors and Weather Stations Catalog-NiuBoL.pdf
Weather Stations Catalog-NiuBoL.pdf
Agriculture Sensors Catalog-NiuBoL.pdf
Water Quality Sensor Catalog-NiuBoL.pdf
Related products
Combined air temperature and relative humidity sensor
TDR Soil Moisture & Temperature Sensor for irrigation| RS485 |4-20mA| NBL-S-THR
Soil pH sensor RS485 soil Testing instrument soil ph meter for agriculture |NBL-S-PH
Wind Speed sensor Output Modbus/RS485/Analog/0-5V/4-20mA
Tipping bucket rain gauge for weather monitoring auto rainfall sensor RS485/Outdoor/stainless steel
Pyranometer Solar Radiation Sensor 4-20mA/RS485
Screenshot, WhatsApp to identify the QR code
WhatsApp number:+8615367865107
(Click on WhatsApp to copy and add friends)